All clothes begin to show signs of wear and tear eventually. When it comes to pants, tights, and the like, they might begin to sag around the knee or waist area after a while. If you have a pair you wear more often than others, this might cause a bit of a problem. No one wants to go out with ill-fitting bottom wear, but the more you wear the same jeans or leggings, the quicker the sagging will start. However, there are ways to prolong the tautness of your bottom wear and avoid sagging in unwanted areas.
What Causes Sagging?
More often than not, sagging is caused by too much folding at crucial areas in your pants. As mentioned earlier, the loose fabric tends to occur at the knees or even the waist area. This usually happens because you bend at these areas the most, creating creases that stretch and weaken the fabric over time.
A preliminary tip to prevent your pants from losing their form is to sit in a way that won’t crease your pants at the knees. Avoid crossing your legs and try to keep them as straight as possible. Alternatively, you can gently pull the legs of your pants a bit before sitting down to hitch them up and minimize the tension on the fabric when you bend your knees.
Now that we’ve started with a few tips on how to avoid sagging, here are some more notes you can take from us on how to fix it when it happens:
Be Aware of The Material You’re Working With
The more stretch the material of the fabric has, the less likely it will crease and sag quickly. That said, you can opt to shop for cotton leggings today or check out other stretchable fabrics, like recycled nylon or polyester.
Different materials also have different care directions. Check the label for any specific instructions there might be for your garments so you can maximize their wearability.
Wash Properly and Appropriately
Once your leggings start to show signs of sagging, stop the problem from getting worse by washing the garment in your washing machine using the hottest cycle possible. This will shrink your clothes and help them fall back into shape. On the other hand, if you’re trying to stop your jeans from sagging, handwash them in cold water. Iron them out to restore their form and soften the fabric as well.
Knowing what type of wash you should do for different kinds of clothing will prolong its lifespan. At the same time, if sagging has already begun, you can give it a quick fix with any of the wash tips stated above.
Segregate Clothes During Washing
Different types of clothes will demand different types of care. The stretch of the fabric can be affected by the way the garments are handled during washing, which is why it’s important to segregate your clothes when you do your laundry. Remember that less elastic and more stiff fabrics like jeans will require different settings from more elastic bottom wear made of thinner material, like leggings.
Segregate your laundry properly and wash garments according to the appropriate settings. If a garment doesn’t have care instructions and the type of material isn’t indicated on the label, launder it together with other fabrics that have a similar thickness and feel.
Use The Right Wash Formula
While we’re on the topic of washing your pants correctly to prevent sagging, it’s also important to know the right formula to wash your pants in. Getting the right mix of detergent and water for washing your jeans, leggings, or tights is crucial to maintaining its form. Check the detergent for the correct amounts to use for your load and follow the dilution instructions.
Air Dry Instead of Using The Dryer
One care tip that pants and leggings do have in common when it comes to fixing sagging is to air dry instead of using a dryer. Air drying will prevent the fabric from getting stretched out. However, if air-drying is really not an option, you can tumble dry your bottom wear at the lowest setting for the shortest possible period.
If sagging has already commenced, you can try shrinking your clothes back to their original size by using a hairdryer. Put it on the warmest setting and focus the heat on the sagging areas immediately after taking your clothes out of the washing machine.
Fold Your Pants
Instead of putting your pants on a hanger, fold them to store. This is especially true for pieces made of heavier fabrics like jeans. This is because the weight of the hanging fabric can pull on the rest of the fibers and cause the shape of the garment to become distorted. While this is mostly the case for jeans, try storing your leggings and tights this way as well, as the tension on a hanging garment can still overstretch leggings and tights.
To make sure you’ve folded your pants properly, shake them out to avoid wrinkles and creases from forming, especially around the bottom hem. Once you’ve got that settled, smooth out your pants on a flat surface and start folding.
Use A Belt
Hitching up your pants before sitting down to prevent overstretching them with your knees is helpful, but if you’re likely to forget, try wearing a belt with your jeans instead. Belts help to keep your pants up and maintain their form over your body. While you can’t use this tip for leggings and tights, opting for a high-waist design can offer the same effect and secure the waistband from getting pulled down when you bend over.
Conclusion
Before tossing out any pants or leggings that have gotten saggy, try the tips above to restore them to their original shape. If you do need new ones, remember that sagging is preventable if you make sure to care for your clothes correctly. By being mindful of your movements and following the care guidelines for your garments, you can extend their lifespan and ensure that they maintain the right fit on your body.